Audi Wheel Fitment

We've documented seven Audi platforms so far: the R8 Gen 1 (2008–2015) and R8 Gen 2 (2017–2023), the RS3 8Y and the S3 8Y (both 2022–2027), the RS5 B9 and S5 B9 (both 2018–2025), and the RS 6 Avant and RS 7 C8 (2021–2026). All use a 5×112 bolt pattern and M14×1.5 lug bolts with a ball seat. The Gen 1 R8 runs staggered 19″ wheels on a 57.1mm bore front and rear, and the Gen 2 a different center bore front and rear (57.1mm front, 66.6mm rear) on staggered 19″ or 20″ wheels; the RS3 runs a reverse-staggered 9″ front and 8″ rear on 19″ wheels, and the S3 runs square 18″ or 19″ wheels, both on a 57.1mm bore. The RS5 runs square 19″ or 20″ wheels on a 66.5mm bore, and the S5 runs square 18″, 19″ or 20″ wheels on the same bore under narrower fenders. The RS 6 Avant and RS 7 share square 21″ or 22″ wheels at 10.5J ET19, also on a 66.5mm bore. Each guide covers the factory wheels, the hardware details that trip up aftermarket wheels, and documented setups. For other RS models, request a guide below.