Forged Wheels for the BMW G80 M3
One-piece forged monoblock wheels, CNC-machined to the exact width and offset you want on your M3. Bored to the G80's 66.6 mm hub, cut for the factory M14×1.25 conical bolts, and checked against your brake package before we machine a thing. No spacers, no hub rings, no guessing.
AI renderVektor on a G80, rendered by AI. We'd rather show your car. Send us photos and get $100.
Weave · 19×10 +12 / 20×11 +18 · Brushed
Built for the G80, G82 and G87. Ready to ship now, no build wait. $3,550.
Four builds that work on the M3
Each one is documented by G80 owners. See the full G80 fitment guide for every option, tire notes and xDrive clearance.
square
- Tires: 275/35R19 all around
- Fit: bolt-on, stock height
- xDrive: yes · rotate tires
19×10.5 ET18
- Tires: 275/35 · 285/35 R19
- Fit: bolt-on, factory look
- xDrive: yes
20×11 ET18
- Tires: 275/35R19 · 285/30R20
- Fit: bolt-on, may rub at full lock
- xDrive: yes
20×11 ET15
- Tires: 285/30 · 295/30 R20
- Fit: for lowered cars
- xDrive: yes
Pick a design, we build it for your M3
Every design is available in any G80 size, shown here on a G80 M3. Click one to open the configurator with your car and that design already selected.
AI renderVektor
Directional Y-spokeBuild on G80 →
AI renderCleave
5-spoke, Y-tips, concaveBuild on G80 →
AI renderCorsa 5
Wide 5-spoke, deep concaveBuild on G80 →
AI renderHeritage
Split-spoke, stepped lipBuild on G80 →
AI renderWeave
10 interlaced spokesBuild on G80 →
AI renderGT5
Sculpted 5-spokeBuild on G80 →
AI renderMesh
Classic tuner meshBuild on G80 →Custom
Start from scratchTalk to us →Honest note: the car photos above are AI renders, not customer cars. Each wheel is rendered from our real product photos, but we'd rather show you real G80s. That's why we pay customers for theirs.
Send us your photos, we'll send you $100
Once your FMB wheels are on, send us a few good photos of your car. If we use them on this page, we'll send you $100. Real G80s on real FMB wheels, replacing the renders one by one.
FOR YOUR PHOTOS
Full-set pricing, published
Painted finish in our stock palette, any width and offset, free shipping to the lower 48. Staggered sets price per axle.
| Diameter | Set of four, from |
|---|---|
| 18-inch | $3,000 |
| 19-inch | $3,150 |
| 20-inch | $3,400 |
| 21-inch | $3,700 |
Brushed, polished or two-tone +$200. Chrome +$500 (20″ and under) or +$1,000 (21″+). Your exact price shows live in the configurator.
From spec to your driveway
- Spec & design approvalAbout 1 week. We confirm size, offset, brake clearance and finish with you.
- MachiningAbout 2 weeks. Machined from a 6061-T6 forged blank to your spec.
- Finishing & inspectionAbout 1 week. Final finish, inspection and boxing.
- Free shippingAbout 2–3 weeks to the lower 48.
Before you order
Will FMB wheels clear the carbon ceramic brakes?
Our manufacturing partner confirms caliper clearance for your specific brake package, including M Carbon ceramics, before production starts. Tell us which brakes your car has when you send your build.
Can I reuse my factory lug bolts?
Yes. We machine a 60° conical seat to match the G80's factory M14×1.25 lug bolts, so they bolt straight on.
Do I need spacers?
No. We machine each wheel to the effective offset you want, so a setup owners run as ET17 with a 5 mm spacer is built by us as a single ET12 wheel.
Do these fit xDrive cars?
All four setups above are documented on xDrive cars. A few aggressive builds in the G80 fitment guide are rear-wheel-drive only, and each one is marked.
Do they fit the G82 M4 too?
Yes. The G82 and G83 M4 share the G80's hubs, brakes and factory offsets. See the G82 M4 fitment guide.
How long does it take?
About 6–7 weeks on average, and 5–8 weeks depending on finish, from first contact to delivery.
Build your G80 set in about two minutes
Pick a design, size and finish and see your price instantly. We'll confirm fitment before anything is machined.